Home > Failed To > Ata Failed To Identify (i/o Error Err_mask=0x4)

Ata Failed To Identify (i/o Error Err_mask=0x4)

Contents

To be sure, run a smart long test. 'smartctl -t long /dev/sdc', wait for it to finish, then check the results, also post the attributes table 'smartctl -A'. Let me know what other information I can post! But it seems theworkaround way has existed for a long time.-Barry --- Robin Getz 2009-07-12 22:16:50Barry:If we have been doing it wrong a long time, we still have been doing it Unmount and then manual fsck fixes some errors, then later dmesg shows attempts to access past end of device, and a further fsck shows massive corruption on the software raid array. Check This Out

Most common causes are power related or unreliable connection especially if backplanes are involved. Code: uname -a Linux server1 2.6.32-5-openvz-amd64 #1 SMP Mon Mar 7 22:25:57 UTC 2011 x86_64 GNU/Linux Code: May 13 16:51:49 server1 kernel: [ 954.196601] ata1.01: exception Emask 0x0 SAct 0x0 SErr I've also tried updating the bios on one of these nodes, to v1.19 released 5 or 6 days ago, but the problem persists... However, if a better cable does not solve the issue, then it is probably a power problem (loose power cable or backplane connection, poor connectors, poor power splitter, overloaded power supply, https://ubuntuforums.org/showthread.php?t=883335

Ata Failed To Identify (i/o Error Err_mask=0x4)

How to easily fix To Identify I O Error Err_mask 0x1 error? Results 1 to 5 of 5 Thread: ERROR: ata1.00 FAILED TO IDENTIFY Thread Tools Show Printable Version Subscribe to this Thread… Display Linear Mode Switch to Hybrid Mode Switch to Threaded Adv Reply August 9th, 2008 #5 mortalic View Profile View Forum Posts Private Message 5 Cups of Ubuntu Join Date May 2007 Beans 21 Re: ERROR: ata1.00 FAILED TO IDENTIFY

User Name Remember Me? It is a good habit to check all SATA connections just before closing a case up. FAQ Forum Quick Links Unanswered Posts New Posts View Forum Leaders FAQ Contact an Admin Forum Community Forum Council FC Agenda Forum Governance Forum Staff Ubuntu Forums Code of Conduct Forum Handshake Comment 5 John 2009-06-30 17:38:14 EDT I should add, that i am looking after a cluster of 6 hp dc7900 nodes.

stress --cpu 8 --io 4 --vm 2 --vm-bytes 128M --timeout 1800s & dbench -D /data/bonnie -t 1800 6 & bonniepp 4) run megastress.sh, as root 5) in another terminal, run: while Ata Bus Error But, we have to keep thiswalk around till it is done. Now that you have 8.04 installed have you tried removing the all-generic parameter and booting up normal? https://lime-technology.com/wiki/index.php/The_Analysis_of_Drive_Issues Bios= v1.16 Comment 8 John 2009-06-30 19:12:03 EDT Created attachment 350031 [details] dmesg, kernel 2.6.30, sda2 frozen, reset, then disabled, some call traces There are some interesting call traces in this

Another a good test would be turning off NCQ before trying to reproduce the problem. # echo 1 > /sys/block/sdX/device/queue_depth You could also try forcing it down to 1.5 Gbs by Problem with the "frozen" devices remains, regardless of boot options... The reason is that it had run other RHTS jobs before and it is running other RHTS jobs now just fine. About Us Contact us Privacy Policy Terms of use Skip navigation Analog.com Analog Dialogue Wiki 简体中文 日本語 HomeBlogsAnalog DialogueEngineerZone SpotlightThe Engineering MindBrowseInboxMy GroupsPreferencesPeoplePlacesContentMy ActivitySupportADIsimPEAmplifiersAnalog MicrocontrollersAudioClock and TimingData ConvertersDesign Tools and

  1. Physical Drive Issues These are actual errors from the drive itself, perhaps a failing drive, or perhaps just failing sectors.
  2. bus_add_driver+0xc2/0x280 Jun 30 13:02:43 node105 kernel: [] ?
  3. Maybe Jeff will have some additional input regarding the SATA recovery modes leading up to the drive being disabled.
  4. If that's the case there may be a workaround other than the all-generic....
  5. pci_device_shutdown+0x0/0x30 Jun 30 13:02:43 node105 kernel: [] ?
  6. notifier_call_chain+0x37/0x70 Jun 30 13:02:43 node105 kernel: [] ? __blocking_notifier_call_chain+0x4d/0x60 Jun 30 13:02:43 node105 kernel: [] ?
  7. LOL.. *sigh* Adv Reply August 9th, 2008 #4 mortalic View Profile View Forum Posts Private Message 5 Cups of Ubuntu Join Date May 2007 Beans 21 Re: ERROR: ata1.00 FAILED
  8. ahci_interrupt+0x0/0x4f0 [ahci] Jun 30 13:02:43 node105 kernel: [] ?
  9. RAID1 conf printout: --- wd:1 rd:2 disk 0, wo:1, o:0, dev:sda2 disk 1, wo:0, o:1, dev:sdb2 RAID1 conf printout: --- wd:1 rd:2 disk 1, wo:0, o:1, dev:sdb2 Comment 9 John 2009-06-30
  10. Board index The team • Delete all board cookies • All times are UTC + 1 hour [ DST ] Get VirtualBox Forum powered by phpBB © phpBB Group By any

Ata Bus Error

Always make certain that they are firmly connected, and not subject to vibration. https://ez.analog.com/docs/DOC-8158 Drive Interface Issues These are problems with the cables and connections to the drive, both power and data, or the quality of the power supplied. Ata Failed To Identify (i/o Error Err_mask=0x4) Drive issues are primarily either drive interface issues (the disk controller, drivers, cables, and power to the drive) or physical issues with the drive itself. Failed Command: Write Fpdma Queued May 13 16:52:24 server1 kernel: [ 988.564753] end_request: I/O error, dev sda, sector 19537325 May 13 16:52:24 server1 kernel: [ 988.564829] I/O error in filesystem ("sda1") meta-data dev sda1 block 0x12a156d

ACPI: RSDP 000F9210, 0014 (r0 IntelR) ACPI: RSDT 7FEE3040, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0) ACPI: FACP 7FEE30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 7FEE3180, 4BB6 (r1 his comment is here This book contains many real life examples derived from the author's experience as a Linux system and network administrator, trainer and consultant. I assume they all are using this same SATA drive WDC WD5000AAKS-6 If possible try to reproduce the problem using a different drive. Drive interface issue #3 An example: ata2.00: exception Emask 0x10 SAct 0x7ff4f SErr 0x400100 action 0x6 frozen ata2.00: irq_stat 0x08000000, interface fatal error ata2: SError: { UnrecovData Handshk } From an Ata1 00 Failed Command Read Fpdma Queued

This corrupted system file will lead to the missing and wrongly linked information and files needed for the proper working of the application. Hope so.Any clues on how one might fix this? Most will end in .00, as there is only one drive per SATA channel, but IDE or IDE emulating channels may have 2 (eg. http://bashprofile.net/failed-to/failed-to-identify-i-o-error-err-mask.html LOL on the plus side I've transfered a whopping 32.1gb since my first post.

I've also put the LBA mark on it in bios, it did nothing.I'm running out of ideas, can anyone please suggest something - obviously not buying a new HD, it's not CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code Early unpacking initramfs... Shutting down filesystem: dm-5 May 13 16:52:28 server1 kernel: [ 992.564717] Please umount the filesystem, and rectify the problem(s) May 13 16:52:29 server1 mod_evasive[5214]: Couldn't open logfile /tmp/dos-91.121.20.30: Input/output error May

Novice Computer User Solution (completely automated): 1) Download (To Identify I O Error Err_mask 0x1) repair utility. 2) Install program and click Scan button. 3) Click the Fix Errors button when

Comment 15 David Milburn 2009-09-02 15:47:19 EDT Since we made significant changes to the error/recovery code in RHEL5 U3 and haven't seen the original problem, and John's problem (Comment #13) is During install and after install while running tests. This page has been accessed 73,471 times. audit_syscall_entry+0x14f/0x1d0 [] sys_unlink+0x10/0x20 [] sysenter_do_call+0x12/0x22 Then dmesg finishes off with: ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen ata1.00: irq_stat 0x00400040, connection status changed ata1: SError: { PHYRdyChg

It is common after opening a computer case, to jostle the cables, and SATA cables are notorious for coming loose, if they aren't the locking type. ata_host_activate+0x1b/0xe0 [libata] Jun 30 13:02:43 node105 kernel: [] ? Home | New | Search | [?] | Reports | Requests | Help | NewAccount | Log In [x] | Forgot Password Login: [x] | Report Bugzilla Bug Legal navigate here Actual results: ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen ata1.00: cmd 60/20:00:00:00:00/00:00:00:00:00/40 tag 0 cdb 0x0 data 16384 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: soft resetting

SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4793.45 BogoMIPS (lpj=7986329) CPU: L1 I cache: 32K, L1 D cache: 32K done ACPI: Core revision 20070126 ACPI: Looking for DSDT in initramfs... pci_device_shutdown+0x0/0x30 Jun 30 13:02:43 node105 kernel: [] ? Steps to reproduce: 1) install CentOS5.3/RHEL5.3 system on software raid (mirrored) array.

This article contains information that shows you how to fix To Identify I O Error Err_mask 0x1 both (manually) and (automatically) , In addition, this article will help you troubleshoot some Some are error flags, some are not. This bug is reported from customer.1. Can someone possibly explain how to actually fix this issue?

Problem is reproducible on all of them, so this is not bad hardware. Offline #10 2008-06-16 15:30:33 gajo Member Registered: 2008-04-01 Posts: 93 Website Re: long boot due to ata recognition problems [SOLVED] Okay, finally managed to fix this problem, and here's how I PPP generic driver version 2.4.2 usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/input/input4 lp: driver loaded but no devices found input,hidraw0: USB HID v1.10 Mouse [Logitech To Identify I O Error Err_mask 0x1 Error Codes are caused in one way or another by misconfigured system files in your windows operating system.

ata_host_start+0xbd/0x190 [libata] Jun 30 13:02:43 node105 kernel: [] ? usb 4-1: new low speed USB device using uhci_hcd and address 3 usb 4-1: configuration #1 chosen from 1 choice rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up I havent seen this before, so, not sure what to think. Shutting down filesystem: sda1 May 13 16:52:24 server1 kernel: [ 988.565916] Filesystem "sda1": xfs_log_force: error 5 returned.

John, if you want to pursue the NCQ issue please open a seperate BZ. dmam_alloc_coherent+0x2b/0x100 Jun 30 13:02:43 node105 kernel: [] ? Perhaps the irq wasnt handled because we were still booting up and raid devices had not been fully detected yet?