Home > Error Code > Frigidaire Gas Range F10 Error Code
Frigidaire Gas Range F10 Error Code
Frigidaire Gas Range F10 Error Code
Gene. PDF Manual 477b7102-4757-44e0-8d1d-70baaa8a80b8.p... That error code stands for a shorted keypad and I would recommend performing a reset on your range. You can not check the EOC instrumentally.
- Newer Frigidaire Range Fault Codes ( Some Kenmore ranges are built by Frigidaire EG:970.1234567, C970.1234567 or 790.1234567 ) Fault Code Likely Failure Condition/Cause Suggested Corrective Action F10 F11 F12 F13 Runaway
- There is no a separate keypad in your range.
- When I check the EOC it give a random number and goes back to OL on the tester.
- Turn off power for 30 seconds then turn power on.
- Keypad no longer responds to any commands.
- Really Thanks Thanks, You save me a 176.00 plus technician Service.
- His idea is easiest and least expensive.
So we were back to blaming the EOC. Any help would be great, thank you. The PF should be cleared and you should be able to operate the oven by touching one of the keypads to appropriate contact pads. Frigidaire Stove Keeps Beeping The burners work fine, oven cannot be used.
SamuraiRepairman 68,179 views 10:49 Troubleshooting Why Your Oven Won't Heat | PartSelect.com - Duration: 2:54. The correction for this problem is to replace the EOC. The part number for the oven relay board 316443920 You can order the part by clicking on the part number. Thanks, please let me know and I'll place an order.
Thanks again and merry Christmas! Kenmore Stove F11 Error Code You may want to start the troubleshooting from testing the temperature probe resistance. Loading... The new one should solve it.
Eoc Frigidaire Oven
Of course nothing that ran from the other controls would work, because of the disconnected ribbons. Use the "Search by the model number" link bellow to see if your range has a such part. Frigidaire Gas Range F10 Error Code If you would order the part from AppliancePartsPros.com by clocking on the part number I posted, you have nothing to loose. Frigidaire Range Error Codes The overlay part number is 316419103 If it happened while the oven was in cooking mode, start the troubleshooting from testing the temperature probe for continuity as described in the article
This error code means a shorted/faulty keypad. Check This Out Have a manual for Kitchen Ranges? Good luck. Michele // May 7, 2015 at 7:38 am Hi Gene, I have a Frigidaire Gallery series, gas stove, Model Number #FGGF3076KB . F11 Error Code Electrolux Range
Peter, you are the man. I managed to push them back into the cap, and we were able to reconnect it to the EOC board, but at least one of them broke off. I cleaned the contacts on the EOC after removing the key pad and voila! Source Keep me posted.
Service people suggest a whole new electronics module, unfortunately. Frigidaire Oven F10 Reset Any ideas? View Most Popular Kitchen Ranges Related Question After a power outage, what is causing my Frigidaire stove to beep and display an F11 code?
Most likely the problem is a faulty EOC.
I had the same exact issue, f11 error code on a frigidaire range oven. In this model the keypad is a part of the EOC. I suggest resetting your stove by either unplugging it or disconnecting the power at your home's circuit breaker for 3-5 minutes. Frigidaire Oven F10 Beeping F11 just appeared one day without us using it, without a power failure, etc -is this common?
I then received a 2nd f10 error and this time because I was only running my oven when I could babysit it, I want to say that my oven decided to Can you suggest a fix for this? Gene. http://bashprofile.net/error-code/f9-code-on-frigidaire-oven.html Otherwise check the oven temperature sensor (RTD sensor) as described earlier and replace if necessary.
Gene // Nov 30, 2014 at 4:31 pm Hello Martha, I will be more than glad to help you and your lovely mother!